Secondary Operator Panel (SOP)
General
The Secondary Operator Panels (SOPs) is an operator interface for controlling the equipment within the 2V03 Underbody Floor Skin Cell.
SOPs allow for personnel to control, adjust, or view the status of the equipment within one of the four zones in the 2V03 Underbody Floor Skin Cell. The zone controlling panel features a Siemens Simatic touch screen display, as well as three buttons to place the zone's equipment into the work position (green button), zone’s equipment to the home position (yellow button), or initiate automatic mode (white illuminated button).
For more information regarding the layout of components and electrical connections for the SOP, refer to pages 704-708 of the Wiring Diagram (WD) 2V03&EFS_EL .
Major Components
The Secondary Operator Panel (SOP) receives 24VDC power that is wired above the Main Electrical Disconnect switch on the specific zone Power Distribution Panel (PDP). If the Main Electrical Disconnect switch is placed into the Off position, the SOP will stop running.
Item | Description | Part Number: |
---|---|---|
A | Siemens ProfiNet Module | 6ES7193-6AR00-0AA0 |
B | Siemens Digital Input Module | 6ES7131-6BH01-0BA0 |
C | Siemens Digital Output Module | 6ES7132-6BH01-0BA0 |
D | Siemens SIMATIC DP, Electronic Module (x2) | 6ES7136-6BA01-0CA0 |
E | ABB 5 AMP Miniature Circuit Breaker (x2) | 2CDS200914R0001 |