Unified Lift Assist
General
The Unified Lift Assist on the 2V07 Roof Inner & Door Ring LH Cell is used to assist the operator to load (2V07=V01GM1) parts to the Geo Fixture (2V07=V01WR1) and remove (2V07=V01GM2) parts from the Visual Check Fixture (2V07=V01UQ51).
Major Components (2V07=V01GM1)
The Unified Lift Assist feature the following components.
| Item | Description | Function |
|---|---|---|
| A | Operator Controls | Used by the operator to control the lift assist as parts are being lifted and lowered. |
| B | Air Cylinder | Controlled by the operator through the controls, these air cylinders are used to create the force needed to properly maneuver the lift assist throughout the station. |
| C | Rough Locators | To ensure parts are properly loaded onto the lift assist, the Rough Locators provide a way operator to align and place the parts. They are neoprene to handle slight bumps without damaging the part but are hard enough to help align the part. |
Major Components (2V07=V01GM2)
The Unified Lift Assist feature the following components.
| Item | Description | Function |
|---|---|---|
| A | Operator Controls | Used by the operator to control the lift assist as parts are being lifted and lowered. |
| B | Air Cylinder | Controlled by the operator through the controls, these air cylinders are used to create the force needed to properly maneuver the lift assist throughout the station. |
| C | Regulator | Used to adjust the air pressure for the vacuum system. If the air pressure is too low, the vacuum pressure may not be strong enough to hold the part properly, which could cause the part to fall out of the lift assist. |
| D | Rough Locators | To ensure parts are properly loaded onto the lift assist, the Rough Locators provide a way operator to align and place the parts. They are neoprene to handle slight bumps without damaging the part but are hard enough to help align the part. |
