Atlas Copco Sealer Controller
General
The Atlas Copco Sealer Controller receive AC from the IDC. From this panel all programming of the Doser Valves, as well as status information on Sealant System. Signals are transmitted between this unit and the PLC.
The Atlas Copco Sealer Controller is equipped with a disconnect switch that will remove all power from the ABB Sealant System, but not the IDC or associated IRC5 Robot Controller.
Major Components
The Atlas Copco Sealer Controller features the following components.
Item | Description | Function |
---|---|---|
A | LAN Ethernet Switch | Connection to other devices through Ethernet:
|
B | XS1 Connector | Connections the Operator panel to the Atlas Copco Sealer Controller. |
C | Optional External Operator Panel | Used to connect a secondary operator panel to the Atlas Copco Sealer Controller. |
D | XSIDC Connector | Connects the IDC to the Atlas Copco Sealer Controller. |
E | XS3 Connector | Connects Atlas Copco Sealer Controller to the ABB Sentry BSR23 located in the IDC that controls the Safety Stop feature. |