Tool Changer
General
The Tool Changer is attached to Robot (2V02=V01AAR41) End of Arm Tooling (EOAT). It helps in the swapping of weld guns on the Pedestal Welder (2V02=V01AR41XQ11).
Major Components
The Tool Changer features the following components.
| Item | Description | Function |
|---|---|---|
| A | Weld Power Cable | Three weld power conductors attached to the tool attachment. |
| B | Safety Signal Module | Internal control signals are safely interlocked internally. The tool changer will not open, independent of control signal orders from the robot controller, unless it is empty, or when the tool changer with tool attachment and tool docked is safely positioned in a tool stand. |
| C | Tool Attachment | Main part of the tool changer, locking on or releasing the current tool and locking onto a new tool. |
| D | Integrated Valves | The Close Valve's passive position is open, which locks the tool changer. The Open Valve's passive position evacuates the air from the unlocking side of the piston inside the tool changer, allowing the tool to be locked. |
| E | Water / Air Couplings | Water and air connections to the tool changer with non-return valves. |