Geo Fixture
General
There are two (2) Geo Fixtures mounted on top of the turntable located in the 2V07 Roof Inner & Door Ring LH Cell. The Geo Fixtures perform the holding of parts during robot pick, place, and securing parts while robot(s) perform the required welding operations. The fixtures can be simple, or complex based on the parts to be processed.
To secure the parts during operation, the Geo Fixture features multiple clamps that grip and secure the part, preventing any movement from occurring. Additionally, the Geo Fixture features rough locators and locating pins to help assist the operator in verifying the part is loaded properly.
Major Components
| Item | Description | Function |
|---|---|---|
| A | Clamps | The Tunkers clamps actuate via pneumatic cylinder and secures the part into position while welding Operations are preformed. |
| B | Rough Locators | To ensure parts are properly loaded onto the Geo Fixture, the Rough Locators provide a way for the operator to align and place the parts into the fixture. |
| C | Locating Pins | The Locating Pins on the Geo Fixture allow for the accurate and controlled placement of the parts. When the operator loads the part onto the Geo Fixture, the part must have each locating pin inserted into the locating hole. |