ABB Weld Controller
ABB Weld Controller
The ABB Weld Controllers are located directly above ABB IRC5 Robot Controllers. They receives transmission of power (current) from the Welding Distribution Boxes and then supplies the required power to the corresponding weld gun. The Weld Controller receives a signal from its robot controller, informing it of which weld schedule to execute. The Weld Controller will then execute the necessary functions to perform the weld.
Item | Description | Function |
---|---|---|
A | Disconnect Switch | Supplies and removes power to the applicable weld gun. |
Major Components
The ABB Weld Controller features the following components.
Item | Description | Part Number |
---|---|---|
A | Weidmuller Switched-Mode Power Supply | PROtop |
B | Rexroth PRC 7000 Process Resistance Welding Control | PRC7300 |
C | Phoenix Contact Switch 2000 Ethernet Switch | FL NAT 2000 |
D | ABB Fuse Holders (x3) | E93/60 J |
E | ABB Sentry Safety Relay | BSR10 |
F | ABB Surge Protective Device (x3) | OVR T2 40-550 C U |
G | ABB 3 Amp Miniature Circuit Breaker | S203M-C3 |
H | ABB 6 Amp Miniature Circuit Breaker | S203-K6 |
I | ABB Manual Motor Starter | MS116 |