2V11 Bodyside Sub
System Overview
The LH and RH Bodyside Sub are assembled at this station. The Header, C-Pillar Latch, Cabin Mounts, and TV Bracket , and all associated brackets, rails and mountings, are installed at the 2V11 Bodyside Sub Cell.
Use the searchable fields in the table below to view, select, and download the desired documentation. The documentation that can be found in the table below includes VMMS Sheets, Lubrication Maps, and Standard Maintenance Procedures (SMPs).
Process
The following is a abridged version of the sequence of operation. Select the Download button for the full sequence of operation.
| No | Step |
|---|---|
| 1 | Turntable rotates 180 degrees. |
| 2 | Operator(s) remove parts from Geo Fixture (2V11-V01WR1) at T1 and T3. |
| 3 | Operator presses palm buttons and shot pins extend and clamps close. |
| 4 | Operator(s) install parts onto Geo Fixture (2V11-V01WR1). |
| 5 | Robots (2V11-V01AR21 and 2V11-V01AR22) move in and weld parts. |
| 6 | Robots (2V11-V01AR21 and 2V11-V01AR22) move to clear. |
| 7 | Turntable rotates 180 degrees. |
| 8 | Operator(s) remove parts from Geo Fixture (2V11-V01WR1) at T2 and T4. |
| 9 | Operator(s) install new parts onto Geo Fixture (2V11-V01WR1). |
| 10 | Operator(s) press palm buttons. |
| 11 | Robots (2V11-V01AR23 and 2V11-V01AR24) move in and weld parts. |
| 12 | Robots (2V11-V01AR23 and 2V11-V01AR24) move to clear. |
| 13 | Turntable rotates 180 degrees. |